Is the reflow profile the problem? X-ray can help.

Looking through some recent x-ray images of what I would call “good bad” boards (at least, that is what they are for me, as they showcase “good” examples of how certain “bad” types of failure look under x-ray inspection), I came across a number of different issues that are different from “traditional” BGA/QFN problems mentioned in this space before. To wit, I noted some images showed where solder paste had not reflowed under the devices, and there was the presence of foreign object(s), such as discrete components, trapped under the package.

FIGURES 1 and 2 show how unreflowed solder paste typically looks under QFN joints in an x-ray image. In the magnified view (Figure 2), individual grains of the solder paste are seen clearly, instead of appearing as a typical single smooth continuous joint. The cause of this is probably not an insufficient reflow profile. Rather, it is more likely the board has not been reflowed at all. As it may be desired, or necessary, to x-ray inspect (representative) boards after placement but before reflow as part of a quality control process, it is worth noting this characteristic shape of the solder under the components is different from what would be expected post-reflow.

Cleanliness is next to stickiness.