Homepage Slideshow

• Who Needs S-Parameters?

  Consider these alternatives for advanced PCB design and analysis.

  https://pcdandf.com/pcdesign/index.php/editorial/menu-features/15092-you-don-t-always-need-s-parameters

• Automating High-Speed Constraints

  IC vendors should make edge rates easily available for inclusion in PCB design libraries

  https://pcdandf.com/pcdesign/index.php/editorial/menu-features/15091-it-s-about-time-let-s-automate-high-speed-constraints

• What's Next for Portable Product Designs

  SLPs with lines and spaces <35µm are ahead.

  https://pcdandf.com/pcdesign/index.php/editorial/menu-features/15090-advanced-packages-and-new-5g-technologies-will-drive-portable-products

• How to 'HDI'

  Why a 3-N-3 stackup is the sweet spot.

  https://pcdandf.com/pcdesign/index.php/current-issue/241-designer-s-notebook/15085-high-density-interconnect-printed-circuit-boards-how-to-hdi

• The Case for a 1.1mm BGA/CGA Package

  A marginally larger package would cut design times and improve PCB yields and performance.

  https://pcdandf.com/pcdesign/index.php/editorial/menu-features/15026-the-case-for-a-1-1mm-bga-cga-package

• From the Archives: 5 Common Mistakes in Board Design

  As often as not, not understanding assembly leads to problems in design.

  https://pcdandf.com/pcdesign/index.php/magazine/11261-pcb-design-1612

• How Big is Your Moat?

  If the clearance is not at least 10 mils, yields may drop.

  https://pcdandf.com/pcdesign/index.php/current-issue/243-flexperts/15025-how-big-is-your-moat