New Products

Clip-on EMI gaskets with water seals include 248 different shapes. Are for EMI shielding (10khz- 22 Ghz), grounding, earthing, electro static discharge and ATEX. >100 dB (10 KHz - 22 GHz); electrical resistance of 0.004 Ohms/cm2; easy to mount; continuous lengths; high shielding performance; low closure force, and high flexibility.

Holland Shielding Systems, www.hollandshielding.com 

FH39 series FPC ZIF connectors can be mated by utilizing either top or bottom contact points, enhancing product design flexibility.

Read more ...

SFGL series of ZIF-terminated FPC connectors come in 4mm pitch and 0.9mm height; back flip-type actuator connector is for use in tablet PCs. VLP series is available with 0.5mm pitch and 0.7mm height. Meet standards for ZIF connectors used in backlight and touchscreen applications; are commonly used in smartphone and mobile phone applications.

FCI, www.fciconnect.com/flex

A7Cf flying probe double-sided test system features four probes on top and four probes on the bottom. Performs up to140 measurements per sec. or up to 8,400 per min., depending on the product under test and test method. Features a test area of 20" x 24"; can inspect pad sizes down to 0.0002µm (0.00013µm with micro needle) and pitches down to 0.0004µm (0.0003µm with micro needle). Universal shuttle system offers a clamp and tension mode for testing flexible and rigid boards. Provides high-speed Kelvin 4-wire measurement; features direct linear drives and a carbon fiber Z-axis.

atg-LM, www.atg-lm.com

Sherlock V2.4 automated design analysis software has an improved parts database; can build and update local database in real time. Two new modules are available: DFMEA and ICT. Sherlock DFMEA modernizes component-level design failure mode effects analysis by automating the process of entering all pin-to-pin interactions. Spreadsheets with thousands of lines can be generated in seconds. Is compliant with AIAG and SAEJ1739 standards for DFMEA.

DfR Solutions, www.dfrsolutions.com

These four test points are optimized for use in single- and double-sided PCBs. Pins fit a 1mm hole; are used to afford secure attachment of scope probes and flying leads for test and measurement purposes. Smallest bottom entry version has a tin finish and provides a plain 6mm pin; the three larger sizes, with a gold finish, are designed for top entry. Are available as a single turret 3.5mm tall, an extended 11mm height turret, and with dual 5.4mm and 3mm turrets. Are RoHS compliant and lead-free.

E-Mark, www.e-markinc.com

Page 251 of 398