Allegro 16.5 printed circuit board and IC packaging software includes advanced miniaturization capabilities, integrated power delivery network analysis, DDR3 design-in kit, bolstered co-design features, and flexible team design.

Read more: Cadence Introduces Allegro v. 16.5

SM28R1127-2 FerriShield Ferrite is a low-profile, flat cable for SCSI2 and thin flex circuits. Solid style provides up to 245 ohms of impedance at 100 MHz and can be specified in one of six sizes to accommodate cable widths ranging from 0.50" to 2.00". Has a profile of 0.030" and a high-tack foam adhesive base. Can be mounted to almost any surface and permits a stacking configuration. Foam base acts as a shock absorber for low to moderate vibration.

Leader Tech, www.leadertechinc.com

No. 930 is an electrically-heated, 500°F inert atmosphere cabinet oven, used for liquid flow solder masking under a nitrogen atmosphere. Workspace dimensions measure 38" x 38" x 38". 30 kW are installed in Incoloy-sheathed tubular heating elements, while a 1500 CFM, 1-1/2 HP recirculating blower provides horizontal airflow to the load. Features 4" insulated walls, aluminized steel exterior, Type 430 stainless steel interior and an automatic door switch to shut off heaters and blower when the door is open. Inert atmosphere construction features include a pressure regulator, flowmeter, pressure gauge, inner oven walls sealing directly against a 1/2" thick silicone rubber door seal, air jacket on the inner oven for cooling, blower shaft seal, positive latching door hardware, adjustable offset door hinges, outlet with pressure relief, and interior seams welded gas-tight; all oven wall penetrations equipped with compression fittings.

The Grieve Corp., www.grievecorp.com

Electrasil-3 silicone-based elastomer is a thermal and electrical conductive interface material. Uses a thin film or screen-printed paste to transfer heat from a printed circuit board ground plane to a heat sink. Bonds PCBs to heat sinks, specifically for RF applications. Is said to offer cooling performance, bond strength and thermal shock resistance. Is a low-cost version of Electrasil family.

American Standard Circuits, www.asc-i.com