Revision 2015.10 of the Gerber format specification adds .FilePolarity, clarifies drawing functions, and adds entries in the syllabus of errors and bad practices.

Ucamco, www.ucamco.com

Cool-Pad CPR7154 thermal interface material dispenses like a thermal pad, but is said to show characteristics of a grease or gel when device temperatures increase to above 45°C.

DRCY is an AI-powered design review agent for hardware engineering workflows that automates first-pass schematic and constraint checks. The system parses datasheets at scale and cross-references schematics, documented constraints and component data to identify compatibility risks early in the design cycle. Detects issues including incorrect voltage references, pins operating outside specified limits, swapped signals, incorrect packages, reverse-polarity passives, mismatched voltage domains, insufficient drive strength and reset circuitry errors. Designed to surface actionable risks before layout and fabrication.

The Torayfan biaxially oriented polypropylene (OPP) release film supports processing temperatures up to 160°C while maintaining thermal dimensional stability and release performance. The uncoated film is intended for use in IC substrate manufacturing, carbon fiber-reinforced plastic prepreg processing and other molding applications where fluorinated release films are commonly used. Compared with standard OPP film, the material exhibits reduced heat distortion at elevated temperatures, low moisture absorption, and low wettability, supporting clean release in contamination-sensitive processes. The film is suitable for dry-room environments and vacuum-based manufacturing steps such as vapor deposition and sputtering.