Printed Circuit Design & Fab Online Magazine - Products

New Products

IR LabMate thermal imaging camera is for electronics applications such as detecting short circuits and product design. Includes cables and image analysis software. Utilizes a 320x240 array detector, has a temperature sensitivity of 0.08˚C, uses an Ethernet interface, and comes with a wide angle lens. Optional accessories include camera stand, circuit board test probe, high calibration range, and relay output module to synchronize board power with software tests.

OptoTherm, www.optotherm.com

OsmondCocoa v. 1.1.19 now provides the ability to define a new pad shape using an arbitrary path outline.

Read more: OsmondPCB Debuts OsmondCocoa v. 1.1.19 CAD

Thermoset UR-288 urethane encapsulant cures at room temperature to produce a flame-retardant, semi-flexible material. Exhibits low shrinkage and stress on components as it cures, and maintains a low viscosity that reportedly achieves complete, void-free encapsulation. Suitable for curing at room temperature. Produces low exothermic heat rise during cure.

Lord Corp., lord.com/electronicmaterials

Magnas series printed circuit board plasma etching treatment system is said to require only three-phase power and compressed air for desmear and etch back applications. Features high etch speed rates and uniformity. Lowers CF4 usage.

Plasma Etch, www.plasmaetch.com

Sprint 120 provides consistent, volume production of legend designs. Is said to eliminate entire screen mask preparation process and require only one baking cycle. Achieves production quality in a single pass with precise drop control and optimized algorithms for fine text and filled areas. Custom print heads are designed for printed circuit boards and processes. UV LED lights enable drop curing on-the-fly and printing of features down to 0.5mm. Automatic measurements and scaling for each panel. Registration accuracy of 35μm.

Orbotech, www.orbotech.com

Check out Board Talk, our new bulletin board: http://theprintedcircuitboard.com

Zebra 2004 elastomeric connector provides 140 electrical connections per inch when positioned between a circuit board and a parallel electronics device such as an LCD display. Is for devices with contact spacing as low as 0.020". Is made from alternating layers of conductive carbon-filled and non-conductive silicone. Delivers a current carrying capacity of 50 mA per 0.040" x 0.040" pad and can be specified in custom lengths up to 9". Comes in widths from 0.015" to 0.118" and has an operational temp. range of -40° to +100°C.

Fujipoly America, www.fujipoly.com