VTOS DDR software verifies new board designs, product introductions, and full volume manufacturing test. Built on VTOS embedded software for hardware verification. Is said to accelerate the process of configuring new DDR, DDR2, LPDDR, and DDR3 memories, while providing proven built-in verification algorithms. Uses minimal system-on-chip (SoC) resources to provide a stable on-device application for configuring, tuning and verifying DDR memories without embedded device restarts. Require no compilation of embedded software in order to work with VTOS DDR. Configuration, margining, and testing of DDR is performed at run time without compilation and system restarts.
PCB Designer 7.2.3 CAD tool fixes an error that occurs at the time of printing NC drill tables. Software performs panelization, transmission line analysis, mesh plane creation, design rules checks, test pin hole auto-generation, and sets keepout areas and height restrictions, and more. Outputs in Gerber and ODB++.
Library Expert's output to Altium Designer has a new “Script” interface; can import footprints and 3D Step into an existing library or a new library with one part at a time or 10,000 parts in minutes. Automatically applies user-defined user preferences for pad shapes for each component family, working units, drafting outlines, footprint Pin 1 zero orientation, construction rules, solder joint goals and layer assignments. Has a footprint designer; can create footprints using manufacturer recommended pattern data. Pads ASCII still an option, but no longer required. Outputs to formats readable by Allegro, OrCAD PCB, OrCAD Layout, CADint, DesignSpark, Expedition, Pads Layout, Cadstar, CR-5000, Pantheon, Pulsonix, P-CAD, Ultiboard, Target 3001!, Eagle, DipTrace, Board Station, SoloPCB, and Proteus. Outputs 3D Step models readable by an increasing number of CAD tools.
Gryphon 3D printer uses inkjet technology for enhanced solder mask deposition on printed circuit boards. Uses direct deposition to apply mask only where it is needed, for better solder mask depth and alignment. Footprint is smaller than direct imaging equipment.
Printoganth MV TP1 electroless copper bath provides high throwing power into blind microvias, enabling ultra-fine lines and spaces of 10/10µm and below. Is said to be a drop-in solution and fully compatible with Atotech desmearing and activation processes for SAP technology. Throwing power values typically 100% on the capture pad and 70% in the wedges for 50/50µm and 60/40µm blind microvias on ABF GX-92 laminates. Deposits feature a favorable surface morphology for better dry film adhesion and etchability performance. Passed reliability tests such as TCT (Thermal Cycle Test), IST (Interconnect Stress Test), QVP (Quick Via Pull Test) and SST (Solder Shock Test).
LAS 260 particle filter features F9 pleat filters for large storage capacity, leading to less downtime and reduced maintenance and operating costs. Filtration efficiency for fine dust (DIN EN 779) and suspended solids (DIN EN 1822) up to 99.995%, as well as gases, vapors and odors. Removes harmful particles at small lasers, laser marking and ultra-short pulse laser processing. Can be used in automated and semiautomated processes standalone or inline. Stepless adjustment of airflow.
