Power Management Bus (PMBus) IC programming solution supports devices from Linear Technologies and TI. Supplements SCIP (Serial Controlled IC Programmers). Runs on DataBlaster controllers and can be used to access PMBus pins via local boundary-scan-compliant devices or from an external DIOS (Digital IO Scan) module.
JTAG Technologies, www.jtag.com
Materials Library in the Speedstack PCB stack-up design and documentation system now includes Ventec’s VT464 halogen-free low-loss printed circuit board laminates. Can assess impact of Ventec’s laminates and prepregs. Collates cost and supplier data with design criteria such as dielectric thickness, transmission line or impedance specifications of different PCB materials.
Polar Instruments, www.polarinstruments.com
P-Series pH and conductivity meters now include P771 pH Meter, P772 conductivity meter and P773 total dissolved solids (TDS) meter. Are pocket-sized, pen-style meters said to make field measurements easy and convenient. Feature high resolution and automatic temperature compensation, rugged waterproof housing (meets IP57 standards), replaceable electrodes and 21 x 18mm LCD display. P771 has a resolution of 0.01 pH, accuracy of ±0.02 pH and measures 0.00 ~ 14.00 pH. P772 has a resolution of 10 µS/cm, accuracy of ±2% full scale and measures 0~19990 µS/cm. P773 has a resolution of 10 ppm, accuracy of ±2% Full Scale, and measures 0~19990.
Anaheim Scientific, anaheimscientific.com
SMP Interface System comes in 50Ω and features VSWR of 1.18 max at 40GHz. Male PCB connectors come in vertical surface mount, vertical through-hole, and edge mount configurations. Three levels of detent available, each with different engage and disengage coupling forces. Cable ended SMP female connectors accommodate 0.047, 0.085, and 0.086 diameter semi-rigid or conformable coaxial cable. For subminiature RF coaxial cable-to-board and board-to-board applications.
Bomar Interconnect Products, www.bomarinterconnect.com
DF50 1mm pitch, board-to-wire connector reportedly reduces required printed circuit board mounting area. Features a locking mechanism designed to prevent uneven locking. Locking function and contact mating occur simultaneously. Has a lance structure with a cable pull force of 10N min. Is designed with blade type contacts attached to a thick housing wall said to be resistant to cracking or deformation. Nickel barrier plating prevents solder wicking. Comes in straight and right angle versions; available in a single-row with 2 to 16 positions or as a double-row with 30 positions. Has a current rating of 1A per pin, a voltage rating of 100 VAC / DC, contact resistance of 50 mO max. at 20mV (1mA) and an operating temperature range of -35° to 85°C. For LCD, LCD TVs, PDP, wireless LANs, office equipment, notebook PCs/laptop computers, industrial control units, automotive audio and navigation systems, medical devices, commercial gaming equipment and consumer hobby applications.
Hirose Electric, www.hiroseusa.com
EP62-1 two-part epoxy is for adhesion, sealing or coating under harsh conditions. Is thermally stable, with a glass transition temperature exceeding 170°C. Has a working life of more than 12 hr. at ambient temperatures and a 100:10 mix ratio by weight. Features color coding. Cures rapidly at elevated temperatures, with schedules ranging from 4 to 6 hr. at 60°-70°C to 10 min. at 125°C. Is an electrical insulator with a volume resistivity exceeding 1014 ohm-cm and a dielectric constant of 3.25 at 60 Hz. Delivers tensile shear strengths greater than 2,300 psi and tensile strengths over 8,500 psi. Contains no solvents or diluents. Serviceable over the temperature range of -60°F to +450°F; has a shelf life of one year in unopened, original containers.
Master Bond, www.masterbond.com/tds/ep62-1