Kisters 3DViewStation supports Model Based Definition (MBD) processes – which means that all production-relevant product information is stored in the digital 3D model right from the start.
Supports use of annotated 3-D CAD models and visualizes annotations on the source file quickly and easily. Also supports the reading of PMI (Product Manufacturing Information) from numerous sources such as Catia, Creo, NX, JT, STEP as well as 2D PDFs with attached JT. Users can create their own 3D annotations or markups and save them again in 3DVS, JT, STEP (AP242), 3D-PDF, 2D-PDF. Different revision levels can be easily compared/ Own markups such as lines, texts or position number graphics can be added and these can be saved again as PMI in KISTERS' own format 3DVS or neutral formats such as STEP or JT. All capabilities of 3DViewStation can be used either independently or in conjunction with a leading system.
Comes in desktop, VR-Edition and HTML5 WebViewer versions plus the online collaboration tool VisShare. All product flavors are intended to be used together with a PLM, ERP or other management system product configuration or service and spare part applications, providing all necessary APIs. HTML5-based WebViewer solution available for cloud, portal and web solutions, which does not require client installation. All file formats can be used in combination with the intelligent navigation and hyperlinking features to address the needs of complex integration scenarios.
Mechnano's Formula1 is an additive manufacturing resin that leverages the power of Carbon Nanotubes (CNTs) to deliver isotropic static dissipative properties to 3D printed parts without compromising mechanical performance and with zero concern for z-axis breakdown or carbon sloughing.
Uses MechT to detangle and separate CNTs and disperse them into a Masterbatch to be used for increasing performance in additive manufacturing materials. Resulting discrete tubes can be tailored to specific mechanical property performance requirements and deliver previously unattainable enhancements such as 50% increase in tensile strength, 200% increase in toughness, or 850% increase in tear resistance. Provides improved mechanical properties and ensures homogeneous electrical properties. Achieves 100% ESD coverage with precise ESD values.
Rohm Semiconductor's CSL1901 series of 0603-size (0.6in × 0.3in)/1608-size (1.6mm × 0.8mm) LEDs are optimized for low-light applications for use in indicators and numeric displays in factory automation equipment (i.e., PLCs) and communication control equipment such as modems and routers.
Reduces brightness variations by half and color sifting by 3nm under low-light conditions. Available in a lineup of five colors in 0603 size.
Pasternack’s new series of field-replaceable connectors feature frequency coverage to 65 GHz, plus SMA, 2.92 mm, 2.4 mm and 1.85 mm connector options with many pin types, including glass bead feed-through or a tab contact, or a pin in a dielectric.
Assist in easily replacing damaged connectors without accessing sealed components, and EMI gaskets provide shielding against RF interference. Contacts mate with five-pin diameters ranging from 0.009" to 0.036". Two-hole and four-hole flange types make for easy assembly in hard-to-reach areas where flexibility is required.
CAN XL Trigger, Decode, Measure/Graph and Eye Diagram (TDME) oscilloscope software option enables users to test, validate and debug automotive electronic control units (ECUs) and 10 Mb/s in-vehicle network (IVN) designs.
Symbolic trigger setup, decode, and data extraction and graph setup using (customer-supplied) DBC or ARXML file.
Supports 29-bit GM CAN Priority ID, Source ID, Parameter ID trigger and decode. Supports use of a customer-supplied DBC or ARXML file for signal selection for triggering and CAN to Value serial data DAC setup. Decode annotation is in Symbolic format, with complete message and signal structures described.
