John Burkhert Jr.

Anticipate the assembler’s needs in placement and routing.

We already design for fabrication, assembly and test. DFx can be extended to thinking about future uses of an assembly. Sometimes a printed circuit board needs to be revised right away. There are things we can do to facilitate rework. Clearly marking all the components is a good start. A robust design will lend itself to touch-up and rework scenarios. Let’s dive into some techniques.

Breadboarding for “science projects.” Ever seen a breadboard? In PCB design terminology, a breadboard is a rectangle with a grid of plated through-holes set on the same pitch as a DIP package (FIGURE 1). The holes will accept axial-leaded components as well as the odd transistor package. Notice the rows of pins are tied together but can be cut as required by the mad scientist in the lab. Jumper wires on the leads create the rest of the circuit. Development boards can usually afford a slimmed down version of this.

 

To continue reading, please log in or register using the link in the upper right corner of the page.

Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article