CircuitMedic introduces Flextac Wire Dots, a wire tacking system. It is comprised of shapes precut from flexible, polymer film membrane that has been coated on one side with a high-pressure and electronics-grade adhesive.
 
The adhesive performance is not affected by high humidity. Bond strengths are reported to be higher after exposure for 7 days at 90° F and 90% relative humidity. Many chemicals, including flux-cleaning solutions, saponifiers, mild acids and alkalis, do not affect the bond.
 
Wires will hold through a PCB hot water wash;  Flextac Wire Dots achieve the best performance at temperatures ranging between 60° F and 100° F.

www.circuitmedic.com

• Prev
• Next