EP62-1 two-part epoxy is for adhesion, sealing or coating under harsh conditions. Is thermally stable, with a glass transition temperature exceeding 170°C. Has a working life of more than 12 hr. at ambient temperatures and a 100:10 mix ratio by weight. Features color coding. Cures rapidly at elevated temperatures, with schedules ranging from 4 to 6 hr. at 60°-70°C to 10 min. at 125°C. Is an electrical insulator with a volume resistivity exceeding 1014 ohm-cm and a dielectric constant of 3.25 at 60 Hz. Delivers tensile shear strengths greater than 2,300 psi and tensile strengths over 8,500 psi. Contains no solvents or diluents. Serviceable over the temperature range of -60°F to +450°F; has a shelf life of one year in unopened, original containers.

Master Bond, www.masterbond.com/tds/ep62-1
 

Nanotherm MBPCB (Metal-Backed Printed Circuit Board) features a nano-ceramic dielectric layer for thermal management.

Read more: Cambridge Nanotherm Launches Metal-backed PCB

Material Disclosure software protects trade secrets about products and raw materials while providing supply chain traceability. Can upload reporting templates such as EICC-GeSI to a secure central database to create reports from consolidated supplier data. Works to increase response times from suppliers and automates querying suppliers on a regular basis, as well as gathering and storing data. Collects data on raw materials, including gold, tantalum, tin and tungsten. Data are collected at the bill of material level down to the substance level throughout the supply chain.

Actio, www.actio.net

This adhesive permits Vectra LCP to adhere to FR4 and ceramic boards even after triple reflow process, without loss of adhesion. Is reportedly ideal for fine molded components. Is flowable and fills long, thin and complicated flow paths with minimal warpage. Is flame-retardant and heat distortion resistant up to 340°C. Shows a high compression shear strength.

Ticona, www.ticona.com
DELO, http://www.delo-adhesives.com/us/