| iSuppli: Sluggish Semi Sales in Store |
|
|
| Written by Mike Buetow | |||
| Wednesday, 01 February 2012 15:28 | |||
|
EL SEGUNDO, CA -- Semiconductor industry revenue will grow 3.3% in 2012 thanks to lingering doubts over the worldwide recovery, research firm IHS iSuppli said today. Sales are expected to reach $323.2 billion, better than the 1.25% increase of 2011, but below historical norms. The overall picture could brighten considerably if the US and the rest of the world recover in 2013, iSuppli said. Under such a scenario, growth from 2013 to 2015 will average between a more encouraging 6.6 to 7.9% (see figure) with total semiconductor revenue by 2015 rising to some $397.7 billion. “Much of the weak performance in both 2011 and this year can be attributed to external circumstances over which the semiconductor industry has no control—the ambiguous state of the global economy, along with assorted troubles in the world’s major markets of the United States, Europe, Japan and China,” said Len Jelinek, director and chief analyst of semiconductor manufacturing research at IHS. “And because the world economy is not in a strong-enough position to drive growth, the semiconductor business is coming under pressure.” Consumer spending is also a key factor determining conditions in the chip market. Although consumer spending lowered the level of inventory of electronic devices and other items incorporating semiconductors during the 2011 holiday season, the reduction was insufficient to re-energize chip demand to replenish stockpiles. Worse, a deliberate decrease in manufacturing run rates by companies in the third quarter of 2011 proved unable to bring inventory down to levels that would have fired up additional orders and increased factory run rates. As a result, semiconductor demand for manufacturers will remain depressed until the second quarter of 2012. Such developments will have a ripple effect throughout the industry. For instance, because factory utilization will not recover until the middle of 2012, the integrated device manufacturers (IDM) that both design and manufacture semiconductors in-house will experience even greater stress to simply maintain the viability of underperforming factories. And with current manufacturing capacity deemed acceptable for meeting demand, most capital expenditures to boost efficiency within the industry likely will be pushed out to 2013.
The most beleaguered semiconductor segment will be the memory space, especially in dynamic random access memory (DRAM), with revenue projected to decline to 16.1% in 2012 on top of a 26.8% fall in 2011. And a once-energetic performer in 2011—NAND flash—will see less rosy prospects this year because of additional capacity coming on to meet a surge of demand for the memory in devices like mobile handsets and media tablets. In contrast, a strong market revenue driver this year will be the wireless communication segment, spurred by media tablets, smartphones and industrial electronics. For the semiconductor industry to revitalize, however, it is imperative that the core PC and peripheral markets experience a significant increase in demand, IHS believes. The first half is almost certain to be a challenging period for the industry, with negative growth being forecast for the historically slow first-quarter season. The industry will begin to rebound in the second quarter and then go on to a strong third quarter, as is normal for the business. Foundries dedicated to manufacturing semiconductors as their main activity will continue to outperform the industry, while IDMs will have lower growth, especially as they have abdicated manufacturing in leading-edge technology—where the high margins are—to the foundries. The advice is for IDMs not to sit by idly and allow fabless or foundry companies to control leading-edge design or production on their own. Otherwise, they risk consolidation, which would have the unintended effect of providing rival foundries with even more opportunities for additional growth.
|
Design News
- IPC, PCB Libraries Team on Library Tools for Design Standard
- Mentor, Tezzaron Optimize Calibre 3DSTACK for 3D-ICs
- FabStream, ADI Offer Digi-Key Parts Library
- DRAM Market Getting Tight
- Ansys Sets Q1 Revenue Mark
- EI SiP Meets Missile Interceptor Challenge
- Sweden to Host SI Workshops
- Altium Signs Fisher/Unitech as Midwest US VAR
- NI's Revenue Jump Can't Save Profits
- 2013 PCD&F NPI Design Awards Open
Market News
- Phones, TVs Boost Printed and Flexible Electronics Sales
- Medical Electronics Market to Double, Offering Ample Opps for EMS
- IT Market Being Pulled Down by PC Sluggishness
- Tablet Sales Surged in Q1
- Smartphone Shipments Up 38% in Q1
- IPC: March PCB Orders Down 2.3%
- Solid Forecast for Enterprise Network Equipment Spending
- IC, Packaging Sales to Grow through 2017
- Driver-Assist Systems Market Going Fast on Own
- Study Says US on Track to Compete with China on Cost
Fab News
- Camtek’s Q1 Revenue Nearly Flat at $18.1M
- Enthone Parent Sees Pickup in PCB Demand
- SMTA, IPC to Co-locate Fall Events
- LPKF Posts Q1 Revenue Up 60%
- Despite Sequester, Aurora Circuits Reports Q1 Sales Up 12%
- Rogers Restructuring to Cut Annual Spending by $12M
- DoD to Propose Changes to Counterfeit Electronics Procurement Practices
- Cambridge Nanotherm to Build 1st Manufacturing Plant
- Ex Jisso Members Re-Form Under CAMEST Banner
- April Not Cruelest Month for Park
Products
Vault 1.1 features enhanced searching and filtering tools and design bill of materials for easy-to-use component navigation.
Features
A series of workshops next month on compliance with RoHS and other directives will help US companies looking to break into the European market.



