BIOMEDevice Boston 2017 is a two-day trade show held at Boston Convention and Exhibition Center on May 3.

The exhibition featured the following events: MD&M Event, Plastec New England, Design & Manufacturing New England and ESC (Embedded System Conference). The exhibition was very compact. More than 400 companies used only 10% of the venue because most of the exhibitors showcased their products in smaller sized booths.

The concept is to feature manufacturers and their processing technologies for the medical device industry. New England is considered one of the best regions in the country for medical care. The companies that participated in the trade show were affiliated with medical components manufacturing. There was an array of manufacturers, except those that produced raw materials and standard components necessary to build medical devices. They featured designs for devices and equipment, plastics molding, etching for circuit boards and metallic components, laser processing for all kinds of materials, printing for functional circuits, surface treatment and plating for plastics, adhesion and lamination of different materials, assembling of wire harness, EMS, tests and analysis. The companies in the exhibition provided cutting-edge technologies.

The show has evolved over the past few years. There were many circuit board manufacturers in the past, but the number of multi-layer board manufacturers dwindled this year. More than 10 flex circuit manufacturers were present, and they displayed several specific flex circuits for smart watches and wearable devices. These new devices use multilayer rigid-flex circuits that are very different from typical rigid-flex applied to aerospace devices. They look fragile because of their thin and narrow frame design used in small and lightweight devices. The manufacturing reps assured everyone their products are reliable, despite their fragile appearance.

The companies headquartered in New England were mostly small ones; however, on a global level, their technologies are cutting-edge. The two companies in particular are TechEtch in Plymouth, MA, and PhotoMachining from Pelham, NH. TechEtch provides the finest etching capabilities for various materials using both of metals and polyimide films. It can generate patterns finer than 50 microns for flex circuits and metallic components. PhotoMachining developed various laser cutting systems for all kinds of solid materials, and can drill 2-micron diameter holes on polyimide films. The company provides not only laser processing services, but laser processing equipment.

Although Boston is home of some of the finest hospitals in the world, many of the manufacturers at the show are headquartered outside of New England. Most of the flex circuit manufacturers are located in the Midwest and West Coast. These companies do not have large manufacturing capabilities, and outsource their manufacturing to contractors in Asia. This aside, the quality of health care in the Boston area is second to none. For this reason, hospitals and medical device companies throughout this area will remain on top for their leading-edge capabilities.

Dominique K. Numakura, This email address is being protected from spambots. You need JavaScript enabled to view it.

DKN Research, www.dknresearch.com

For newsletter archives visit http://www.dknresearchllc.com/DKNRArchive/Newsletter/Newsletter.html

Headlines of the Week (Contact This email address is being protected from spambots. You need JavaScript enabled to view it. for further information)

1. AIST (Major R&D organization in Japan) 4/14 Has co-developed an yttrium base superconductor with the largest current density in the magnetic field.

2. Murata codeveloped a new compact lightweight hybrid system of photovoltaic cell and lithium ion batteries with Nagase for smart homes.

3. Alps Electric decided to build a new 37,000 sq. m building in Miyagi Prefecture for next generation IoT businesses. Total employees will be over 2000.

4. Mitsubishi Materials commercialized a new functional coating technology of fluorinated compounds with an electrolysis process electronic products.

5. DNP co-developed an e-paper display operated by PV cells in room conditions with Sekisui Chemical for electronic signage.

6. Hitachi High Technologies will roll out a new hybrid ion mill system “ArBrade 5000” with high throughput for analytical process of electronic materials.

7. NEDO started an R&D project for manufacturing of bio-base fuels used in jet-propelled airplanes.

8. Fujitsu developed a new circuit technology that makes power efficiency higher for the hard wears of the Deep Learning system.

9. Omron developed a programmable logic controller with AI algorithm for the manufacturing plant. It detects irregularities in the process effectively.

10. Murata started volume production of a small-size WiFi RF sub module for smartphones using multilayer ceramic technologies.

Recent Articles of DKN Research

Find the full articles at http://www.dknresearchllc.com/DKNRArchive/Articles/Articles.html  

Submit to FacebookSubmit to Google PlusSubmit to TwitterSubmit to LinkedInPrint Article