A8a test system comes with eight test heads and four cameras for optical alignment. Tests pad sizes down to 35 microns. Test area is 18" x 12". Eliminates limitations of test point density or fine-pitch contacts. Features embedded component test or a 4-wire Kelvin measurement with an accuracy of +/-0.025 mΩ. Comes with separate good and bad board stacker. Bad boards can be optionally labeled by a 2D code indicating reference between the boards and corresponding fault file. Feeder capacity of 390mm. Dual shuttle system reduces product exchange time to less than 4 sec. in automation mode.
 
atg Luther & Maelzer, www.atg-lm.com