FKN Systek introduces the N100 Nibbler for singulating tab-routed printed circuit boards. Blades come in standard thicknesses of 0.120 inch, 0.093 inch and 0.062 inch, was well as custom sizes.
 
Because the N100 cuts tabs cleanly on each side, additional clean up isn’t required. During the process, only one tab is cut at a time so the panel isn’t pressed between two points during the cut, placing minimal stress on the board.
 
Features include a quick connect pneumatic port that plugs directly into factory air and a waste compartment that collects excess tab material.
 
www.fknsystek.com