Open the Pod Bay Doors, HASL Print E-mail
Written by Duane Benson   
Wednesday, 22 January 2014 15:05

Does anyone use HASL (hot air surface leveling) anymore? It's also known as HAL.

Prior to the RoHS days, HASL was probably the most common surface finish. You can get it lead-free, but most boards seem to use immersion silver or ENIG (electroless nickel immersion gold). HASL has traditionally come at a lower cost than those other two finishes, but immersion silver can generally be found at the same price now.

Our friends at Sunstone.com, for example, charge the same for silver and tin/lead HASL. ENIG is still more expensive no matter where you go, though.

One of the chief disadvantages of HASL these days, is the lack of planarity on the surface. (Note the bumps on the BGA land pattern in the image on the right.) With through-hole or large components, an uneven surface doesn't matter so much. With the increasingly smaller BGAs and QFNs, however, surface irregularities can cause big problems.

Both immersion silver and ENIG have nice flat surfaces. OSP (organic surface preservative) has a pretty flat surface too, but it's not used much except in high volume consumer goods or specialized applications.

DUANE BENSON is marketing manager at Screaming Circuits (screamingcircuits.com); dbenson@screamingcircuits.com.

 

Search

Search

Login

CB Login

Language

Language

English French German Italian Portuguese Russian Spanish
 


Printed Circuit Design & Fab Magazine on Facebook