Printed Circuit Design & Fab - OptoTherm’s Enclosure for EL System PCB Testing

Home

News

IPC Expo Products

OptoTherm’s Enclosure for EL System PCB Testing

You must be registered to access the full content of this site.
To register, click here.

Part Search

OptoTherm’s Enclosure for EL System PCB Testing

Written by Philip Buonpastore
Monday, 02 June 2008
OptoTherm's new EL thermal imaging system enclosure provides a claimed stable test environment from the ambient environment, and blocks air currents generated by heating and air conditioning ducts that can influence the thermal patterns shown by its infrared camera inspection system. A motorized camera slide and controller position the camera for circuit board comparison and short circuit tests, and to verify PCB functionality. A platform with adjustable PCB locators enable repeatable positioning of board sizes up to 22" x 20". The company states that the system features low cost and fast setup, with no custom hardware required, and that tests can usually be setup in less than an hour. optotherm.com

[ Back ]

Sponsor Links

Free Product Evaluation:
Experience industry-leading PCB design tools, handling advanced technology designs. Reduce your design spins and increase manufacturing quality. Evaluate today!

Need PCB prototypes fast?
Sunstone Circuits takes the pain out of prototyping! We are dedicated to making the online ordering of PCB prototypes simple, fast, and easy from quote to delivery. Quick access to our 24/7/365 customer service team and easy online order tracking takes the pain out of sourcing prototypes online.
Put us to the test - order Sunstone Circuits today!

PCB systems design teams face challenges with IP management and collaboration across multiple groups. This free Webinar highlights best practices that optimize these efforts across the design flow. Learn more!

Classifieds
DFEC Enterprise, Inc. - PCB Sales Representative Process Engineer - Chemical Shure - Project Engineer, PC Board Development Cisco - PCB Sourcing Commodity Manager Danfoss Drives - PCB Designer

New Product

Mezza-pede Low Profile SMT Connector System

Advanced Interconnections Corporation introduces Mezza-pede, SMT connectors designed for 1 mm-pitch micro board-to-board and flex cable-to-board applications. With a low profile, the screw-machined system is well suited for numerous high reliability applications, such as providing power to tunable lasers.

The pin and lead frame design is fully surface mountable, and Mezza-pede has a mated height of 4 mm. Features include screw-machined terminals with multi-finger contacts with a per contact current rating of greater than 1 Amp at 80° C.

Mezza-pede comes in standard dual row 8- and 14- position models. Other pin counts and optional enhancements are offered.

www.advanced.com