Home arrow News arrow IPC Expo Products arrow Christopher Associates Machvision PCB Verification System
Part Search

NEW!
Find and quote components




Powered by


Terms Of Use
Christopher Associates Machvision PCB Verification System Print E-mail
Written by Philip Buonpastore   
Wednesday, 30 April 2008
Christopher Associates Inc. has announced its introduction of the Machvision Hole Doctor verification system for printed circuit fabrication applications. The company states that the product is an in line conveyor system for the inspection and verification of hole count, hole diameter, location accuracy and hole quality on rigid, microvia/HDI, and flexible PCBs, and can be used after drilling, desmearing and plating or for final inspection or QC.

The company states the system can be programmed using a “golden board” or drill files to inspect hole diameters from .006” - .400” and up to 16:1 aspect ratios on panels from .010” to .400” thick. Claimed defect inspections include plugged holes, improper hole diameters, poor drilling accuracy, and other critical parameters using an XP-based SPC software package.
[ Back ]


Sponsor Links

Free Product Evaluation:
Experience industry-leading PCB design tools, handling advanced technology designs. Reduce your design spins and increase manufacturing quality. Evaluate today!


Need PCB prototypes fast?
Sunstone Circuits takes the pain out of prototyping! We are dedicated to making the online ordering of PCB prototypes simple, fast, and easy from quote to delivery. Quick access to our 24/7/365 customer service team and easy online order tracking takes the pain out of sourcing prototypes online.
Put us to the test - order Sunstone Circuits today!


PCB systems design teams face challenges with IP management and collaboration across multiple groups. This free Webinar highlights best practices that optimize these efforts across the design flow. Learn more!

Classifieds


New Product
CSP/BallNest Socket Provides Consistant Test and Burn-In
Aries Electronics introduces the CSP/BallNest Hybrid Socket for test or burn-in of chip scale package, ball grid array, microBGA, land grid array and prototyping.
 
It can be used on any device having a pitch of 0.30 mm or larger. Features include a lid that nests each ball termination into the socket for a reliable connection and a four-point crown providing scrub on solder oxides.
 
It has a signal path of 0.0777 inches and provides minimal signal loss for higher bandwidth capability. Estimated contact life is 500,000 cycles, and the socket is available in custom materials, sizes, configurations and platings.
 
www.arieselec.com
Copyright © 2008 - This site contains copyrighted material that cannot be reproduced without permission.
Powered by Webtising