| Direct Logix Offers Control Center v.5 Pre-CAM Tool |
 |
 |
| Written by Chelsey Drysdale | |||
| Tuesday, 06 March 2012 23:14 | |||
|
Control Center v. 5 software is for quoting, engineering planning, CAM automation, DfM, and automated traveler generation. PCB quotation, traveler creation, CAM and stackup technology are reportedly fast to implement. A printed circuit fabricator could install and deploy in a few weeks, as well as migrate from other legacy software packages using existing interfaces.
|
Design News
- Pakistan Hopes New Design Centers Will Aid Push into PCB Market
- PCB West Technical Conference Announced
- iNEMI Seeks Participation on Implantable Device Project
- IPC-2581 Standard to be Circulated for Final Vote
- Vast Majority of Parts Placed are SMT, IPC Survey Finds
- Ansys Software Pirate Gets 12 Years
- DoD Seeks Public Input on Contract Obligations Concerning Fake Parts
- iNEMI Releases Counterfeit Parts Assessment
- Plexus Opens 2d Scotland Site
- Report: Foxconn to Spin Off Connector Unit
Market News
- Slow Growth Ahead for Electronics Industry, IPC Says
- US Mfg Orders Slide in April
- April Semi Sales Lag, Moderate Growth Ahead
- Semi Fab Expectations High for US
- Semi Fab Equipment Outlook Improving
- Q1 DRAM Revenue Rises 6% Sequentially
- IDC Downgrades PC Outlook
- Server Shipments Slow in Q1
- IDC Forecasts Tablet Shipments to Grow 58.7% in 2013
- Europe to Prime Semi Pump to Tune of $6.5B
Fab News
- BOMcheck Reachs 1M RoHS and REACH Materials Declarations
- Lazer-Tech Acquires Sales Firm
- AT&S to Push into IC Substrate Market
- Partner Suggests More Acquisitions Ahead for Advanced Circuits
- Plasma Technology Workshop Set for Ontario
- Bare Board Market Forecast for 8% CAGR Through 2017
- GBM Expects Auto Sales to Drive New Growth
- New Fine-Line Etching Process Said to Eliminate H2O2
- RoHS2 Webcast Offered this Month
- N. American PCB Book-to-Bill Hits Highest Point since July 2010
Products
Mitsubishi Electric Debuts ML605GTW4-UV NC Drill
ML605GTW4-UV NC laser drill features two high-energy UV laser oscillator heads. Uses 355nm wavelength suitable for drilling polyimide material/flexible substrates. Mitsubishi Electric, www.mitsubishielectric.co.jp
ML605GTW4-UV NC laser drill features two high-energy UV laser oscillator heads. Uses 355nm wavelength suitable for drilling polyimide material/flexible substrates. Mitsubishi Electric, www.mitsubishielectric.co.jp
Search
Search
Login
CB Login
Language
Language
Features
New Trends From JPCA Show 2013
The world’s largest electronics show for Electronics Packaging, Circuits and Assembling (the JPCA Show) was held at Tokyo Big Sight from June 5 through June 7. The following shows were held concurrently in the convention center: Large Electronics Show 2013, JIEP 2013 (Microelectronics Show), Jisso Protech 2013 and Monotsukuri Fiesta 2013. The electronics industry in Japan is suffering its worst slump in history. I was hoping to see some...
The world’s largest electronics show for Electronics Packaging, Circuits and Assembling (the JPCA Show) was held at Tokyo Big Sight from June 5 through June 7. The following shows were held concurrently in the convention center: Large Electronics Show 2013, JIEP 2013 (Microelectronics Show), Jisso Protech 2013 and Monotsukuri Fiesta 2013. The electronics industry in Japan is suffering its worst slump in history. I was hoping to see some...
- Achieving Proper Placement of Passive Devices Used for Enet Signal Termination
- Hall of Inventors
- Using Forensics to Improve PCB Design and Assembly
- CAD Pioneers Lead Latest Hall Inductees
- Electrical Performance in a Thin Package
- Making PCB Design a Team Approach
- IPC-2581 Consortium Update
- ESD Standards: An Annual Progress Report
- Reinventing Japan
- The Manufacturing Spin
Printed Circuit Design & Fab Magazine on Facebook